2026-09-18T07:32:19+00:00 www.olibetta.ch https://www.olibetta.ch/en-CH Olibetta switzerland@olibetta.com https://www.olibetta.ch/en-CH

200
Easy to install for T5 & T8
High efficiency of 150 lm/W]]>

2026-09-01T22:00:00+00:00 2026-09-01T22:00:00+00:00 https://www.olibetta.ch/en-CH/jbl/led-solar-natur-31w-849-895mm-gen-2 Illuminate Your Aquarium with Powerful, Vibrant Light This state-of-the-art lighting unit provides an impressive output of 150 lumens per watt for your aquarium. The light covers the photosynthetically active radiation range ideally and achieves high PAR values exceeding 200 µM/s/m², effectively stimulating photosynthesis in aquatic plants and promoting lush growth. Installation is straightforward thanks to the convenient plug-and-play system. Using the supplied end caps, the light easily clips into existing T5 or T8 tube sockets, or mounts flexibly onto the tank rim using the adjustable brackets. Housed in a cooling-optimised casing, the warm and cool white LEDs operate reliably via two separate channels. Choose between three preset colour temperatures (2,700 K, 4,000 K, and 6,700 K) with the included infrared remote control, and adjust the brightness seamlessly using stepless dimming. Featuring an IP68 waterproof rating, the housing is robust and designed for continuous use. Combined with an optional RGB add-on, the system is suitable even for marine reef aquariums, while an upgrade to smart app control allows for customisable daily lighting cycles at any time. Highlights at a glance: Full-spectrum light with high efficiency of 150 lm/W High PAR values for healthy, lush plant growth Flexible mounting options using retrofit adapters and rim-mounting brackets Intuitive light colour control via the included remote control Fully waterproof with an IP68 rating Technical details: Dimensions (L x W x H): 795 x 71 x 20 mm Kelvin: 2700, 4000, 6700 Lumens: 4400 Replaces: 2 x 30 W/T8 or 45 W/T5 each Extendable: 85–110 cm Voltage: 24 V Number of LEDs: 288 LEDs (144 cool white, 144 warm white)

200
Easy to install for T5 & T8
High efficiency of 150 lm/W]]>

2026-09-01T22:00:00+00:00 2026-09-01T22:00:00+00:00 https://www.olibetta.ch/en-CH/jbl/led-solar-natur-53w-1449-1500mm-gen-2 Illuminate Your Aquarium with Powerful, Vibrant Light This advanced lighting fixture brings a carefully balanced full-spectrum light to your aquarium, with a highly efficient output of 150 lumens per watt to support aquatic plant growth. The powerful light delivers very high PAR values of over 200 µM/s/m² to promote lush plant growth, while efficient Gen 2 technology ensures excellent illumination. Installation is simple thanks to the plug-and-play design: clip the light directly into existing T5 or T8 tube holders using the matching adapters, or place it flexibly on the aquarium rim with the adjustable mounting brackets. The integrated infrared remote control lets you choose easily between three coordinated colour temperatures, from warm white to cool white, and adjust the brightness continuously. With its waterproof IP68 design, the cooling-optimised lamp body is well suited to long-term use. Combined with an optional RGB add-on, the system is also suitable for marine aquariums, while optional smart app control allows individual lighting scenarios at any time. Key benefits at a glance: Full-spectrum light with excellent efficiency of 150 lm/W High PAR values to support strong aquarium plant growth Flexible installation with retrofit adapters and mounting brackets Intuitive light colour control via the included remote control Technical details: Dimensions (L x W x H): 1395 x 71 x 20 mm Kelvin: 2700, 4000, 6700 Lumens: 6800 Replaces: 2 x 58 W/T8 or 80 W/T5 Extendable: 145-170 cm Voltage: 24 V Number of LEDs: 512 LEDs (256 cool white, 256 warm white)

200
Easy to install for T5 & T8
High efficiency of 150 lm/W]]>

2026-09-01T22:00:00+00:00 2026-09-01T22:00:00+00:00 https://www.olibetta.ch/en-CH/jbl/led-solar-natur-48w-1149-1200mm-gen-2 Illuminate Your Aquarium with Powerful, Vibrant Light This well-designed lighting system delivers powerful full-spectrum illumination for your aquarium, with a highly efficient output of 150 lumens per watt to support aquatic plant growth. High PAR values of over 200 µM/s/m² provide targeted support for photosynthesis and help encourage lush, dense plant growth. Installation is quick and easy: using the adapters included in the set, the light can be fitted into existing T5 or T8 tube holders, or placed flexibly on the aquarium rim with the adjustable mounting brackets. The cooling-optimised casing includes warm white and cool white LEDs, which are controlled via two channels. Use the included infrared remote control to easily switch between three preset colour temperatures of 2700, 4000 and 6700 Kelvin and adjust the brightness to suit your needs. The system is fully waterproof to IP68 and can be upgraded as required with an RGB add-on for marine aquariums or app control. Key features at a glance: Full-spectrum light with exceptional efficiency of 150 lm/W High PAR values for magnificent growth of your aquarium plants Flexible installation options thanks to retrofit adaptors and mounting brackets Intuitive control of light colours via the supplied remote control Fully waterproof to IP68 standard Technical details: Dimensions (L x W x H): 1095 x 71 x 20 mm Kelvin: 2700, 4000, 6700 Lumens: 6100 Replaces: 2 x 36 W/T8 or 54 W/T5 Extendable: 115–140 cm Voltage: 24 V Number of LEDs: 416 LEDs (208 cool white, 208 warm white)

200
Easy to install for T5 & T8
High efficiency of 150 lm/W]]>

2026-09-01T22:00:00+00:00 2026-09-01T22:00:00+00:00 https://www.olibetta.ch/en-CH/jbl/led-solar-natur-16w-438mm-gen-2 Illuminate Your Aquarium with Powerful, Vibrant Light This state-of-the-art lighting unit provides an impressive output of 150 lumens per watt for your aquarium. The light covers the photosynthetically active radiation range ideally and achieves high PAR values exceeding 200 µM/s/m², effectively stimulating photosynthesis in aquatic plants and promoting lush growth. Installation is straightforward thanks to the convenient plug-and-play system. Using the supplied end caps, the light easily clips into existing T5 or T8 tube sockets, or mounts flexibly onto the tank rim using the adjustable brackets. Housed in a cooling-optimised casing, the warm and cool white LEDs operate reliably via two separate channels. Choose between three preset colour temperatures (2,700 K, 4,000 K, and 6,700 K) with the included infrared remote control, and adjust the brightness seamlessly using stepless dimming. Featuring an IP68 waterproof rating, the housing is robust and designed for continuous use. Combined with an optional RGB add-on, the system is suitable even for marine reef aquariums, while an upgrade to smart app control allows for customisable daily lighting cycles at any time. The highlights at a glance: Full-spectrum light with high efficiency of 150 lm/W High PAR values for healthy, lush plant growth Flexible mounting options using retrofit adapters and rim-mounting brackets Intuitive light colour control via the included remote control Fully waterproof with an IP68 rating Technical details: Dimensions (L x W x H): 383 x 71 x 20 mm Kelvin: 2700, 4000, 6700 Lumens: 2200 Replaces: 2 x 15 W/T8 or 24 W/T5 each Extendable: 45–70 cm Voltage: 24 V Number of LEDs: 128 LEDs (64 cool white, 64 warm white)

200
Easy to install for T5 & T8
High efficiency of 150 lm/W]]>

2026-09-01T22:00:00+00:00 2026-09-01T22:00:00+00:00 https://www.olibetta.ch/en-CH/jbl/led-solar-natur-28w-742mm-gen-2 Illuminate Your Aquarium with Powerful, Vibrant Light This state-of-the-art lighting unit provides an impressive output of 150 lumens per watt for your aquarium. The light covers the photosynthetically active radiation range ideally and achieves high PAR values exceeding 200 µM/s/m², effectively stimulating photosynthesis in aquatic plants and promoting lush growth. Installation is straightforward thanks to the convenient plug-and-play system. Using the supplied end caps, the light easily clips into existing T5 or T8 tube sockets, or mounts flexibly onto the tank rim using the adjustable brackets. Housed in a cooling-optimised casing, the warm and cool white LEDs operate reliably via two separate channels. Choose between three preset colour temperatures (2,700 K, 4,000 K, and 6,700 K) with the included infrared remote control, and adjust the brightness seamlessly using stepless dimming. Featuring an IP68 waterproof rating, the housing is robust and designed for continuous use. Combined with an optional RGB add-on, the system is suitable even for marine reef aquariums, while an upgrade to smart app control allows for customisable daily lighting cycles at any time. Highlights at a glance: Full-spectrum light with high efficiency of 150 lm/W High PAR values for healthy, lush plant growth Flexible mounting options using retrofit adapters and rim-mounting brackets Intuitive light colour control via the included remote control Fully waterproof with an IP68 rating Technical details: Dimensions (L x W x H): 687 x 71 x 20 mm Kelvin: 2700, 4000, 6700 Lumens: 3800 Replaces: 2 x 25 W/T8 or 35 W/T5 each Extendable: 75–100 cm Voltage: 24 V Number of LEDs: 240 LEDs (120 cool white, 120 warm white)

200
Easy to install for T5 & T8
High efficiency of 150 lm/W]]>

2026-09-01T22:00:00+00:00 2026-09-01T22:00:00+00:00 https://www.olibetta.ch/en-CH/jbl/led-solar-natur-20w-549-590mm-gen-2 Illuminate Your Aquarium with Powerful, Vibrant Light This state-of-the-art lighting unit provides an impressive output of 150 lumens per watt for your aquarium. The light covers the photosynthetically active radiation range ideally and achieves high PAR values exceeding 200 µM/s/m², effectively stimulating photosynthesis in aquatic plants and promoting lush growth. Installation is straightforward thanks to the convenient plug-and-play system. Using the supplied end caps, the light easily clips into existing T5 or T8 tube sockets, or mounts flexibly onto the tank rim using the adjustable brackets. Housed in a cooling-optimised casing, the warm and cool white LEDs operate reliably via two separate channels. Choose between three preset colour temperatures (2,700 K, 4,000 K, and 6,700 K) with the included infrared remote control, and adjust the brightness seamlessly using stepless dimming. Featuring an IP68 waterproof rating, the housing is robust and designed for continuous use. Combined with an optional RGB add-on, the system is suitable even for marine reef aquariums, while an upgrade to smart app control allows for customisable daily lighting cycles at any time. Highlights at a glance: Full-spectrum light with high efficiency of 150 lm/W High PAR values for healthy, lush plant growth Flexible mounting options using retrofit adapters and rim-mounting brackets Intuitive light colour control via the included remote control Fully waterproof with an IP68 rating Technical details: Dimensions (L x W x H): 495 x 71 x 20 mm Kelvin: 2700, 4000, 6700 Lumens: 2400 Replaces: 2 x 18 W/T8 or 24 W/T5 each Extendable: 55-80 cm Voltage: 24 V Number of LEDs: 176 LEDs (88 cool white, 88 warm white)

200
Easy to install for T5 & T8
High efficiency of 150 lm/W]]>

2026-09-01T22:00:00+00:00 2026-09-01T22:00:00+00:00 https://www.olibetta.ch/en-CH/jbl/led-solar-natur-47w-1047mm-gen-2 Illuminate Your Aquarium with Powerful, Vibrant Light This modern aquarium lighting unit offers an impressive output of 150 lumens per watt, providing aquarium plants with efficient, targeted light. The system covers the photosynthetically active range exceptionally well and achieves very high PAR values of over 200 µM/s/m² to support healthy plant growth. Installation is fairly straightforward. Thanks to the practical plug-and-play design, the light can either be attached using the included mounting brackets or clipped easily into existing T5 and T8 tube holders with the matching end caps. Warm white and cool white LEDs are housed inside the cooling-optimised casing, while two channels let you choose between three preset colour temperatures: 2700 K, 4000 K and 6700 K. Adjustments such as continuous dimming can be made easily using the included infrared remote control. The fully waterproof IP68 housing is also well protected against moisture. For aquarium keepers looking for even more variety, the light can be expanded flexibly with an RGB add-on for marine aquariums or smart smartphone control. Highlights at a glance: Full-spectrum light with high efficiency of 150 lm/W High PAR values for healthy, lush plant growth Flexible mounting options using retrofit adapters and rim-mounting brackets Intuitive light colour control via the included remote control Fully waterproof with an IP68 rating Technical details: Dimensions (L x W x H): 992 x 71 x 20 mm Kelvin: 2700, 4000, 6700 Lumens: 6100 Replaces: 2 x 54 W/T5 Extendable: 105–130 cm Voltage: 24 V Number of LEDs: 384 LEDs (192 cool white, 192 warm white)

Reusable resin
Ready to use]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/arka/ultra-pure-high-performance-filter-medium Enjoy a crystal-clear view of your underwater world with Ultra-Pure, a premium filter medium for freshwater and marine aquariums. Designed to remove cloudiness, yellowing substances and organic compounds from the water, this macroporous adsorber resin is an effective choice for clearer aquarium water. Thanks to its special porous structure, the synthetic medium binds even tiny organic molecules and significantly outperforms conventional activated carbon or standard ion exchangers. The filter medium comes ready to use in a practical filter bag, which should be placed in a high-flow area of your filter system. Tip: One of the key advantages of this filter medium is that it can be reused: Once the resin is depleted, it can be regenerated in a non-metallic container using a 1:1 mixture of water and unscented household bleach (8.25% hypochlorite) for 24 hours in a well-ventilated area. After thorough rinsing, the medium is ready to perform again at full capacity in aquariums of up to 400 litres. Key benefits at a glance: Suitable for use in freshwater and marine aquariums Reliably removes organic waste, yellowing substances and cloudiness Special macroporous structure binds even the smallest molecules Ready to use in a pre-filled filter bag for high-flow areas Economical and suitable for aquariums of up to 400 litres Can be regenerated several times using household bleach

Medium grain size 5–10 mm
Retains moisture]]>

2026-09-15T22:00:00+00:00 2026-09-15T22:00:00+00:00 https://www.olibetta.ch/en-CH/compo/terrarium-substrate-for-adult-animals COMPO Terrarium Substrate creates optimal conditions for medium to large lizards and other demanding reptiles. Its loose structure encourages natural behaviour, allows comfortable burrowing and supports egg-laying. It also ensures consistent moisture regulation and a stable microclimate inside the terrarium. Directions for use: Loosen the substrate and spread a 5–10 cm layer evenly across the base of the terrarium Ensure animals are able to burrow completely Lightly mist with water if required to achieve the desired humidity level Replace soiled substrate regularly Wear gloves while handling and use as needed for the species

Medium grain size 5–10 mm
Retains moisture]]>

2026-09-15T22:00:00+00:00 2026-09-15T22:00:00+00:00 https://www.olibetta.ch/en-CH/compo/terrarium-substrate-for-snakes-and-other-reptiles COMPO Terrarium Substrate provides ideal conditions for medium to large lizards and other demanding reptiles. Its fine, loose structure encourages natural behaviour, allows comfortable burrowing and supports egg-laying. At the same time, the substrate helps regulate moisture, creating a stable microclimate within the terrarium. Application: Loosen the substrate and spread a layer of at least 5–10 cm across the base of the terrarium Ensure animals are able to burrow completely Lightly mist with water if required to adjust humidity levels Replace soiled substrate regularly Wear gloves while handling and use as needed for the species

Coarse sieving 10–18 mm
Retains moisture]]>

2026-09-15T22:00:00+00:00 2026-09-15T22:00:00+00:00 https://www.olibetta.ch/en-CH/compo/terrarium-substrate-for-large-animals COMPO ZOO Terrarium Substrate for Large Animals creates ideal conditions for large lizards and reptiles. This natural product made from pine bark is particularly loose, lightweight and fibre-free. It allows the animals to burrow, dig or lay eggs. It also retains moisture and helps maintain an optimal environment inside the terrarium. Free from chemical additives. Application: Loosen the substrate and spread a layer at least 10 cm 10 cm deep in the terrarium Ensure animals are able to burrow completely Lightly mist with water if required Check regularly for soiling and replace as necessary Suitable for indoor use, in the greenhouse, garden, balcony and pots

Fine sifting 0–5 mm
Loose, light, and fiber-free]]>

2026-09-15T22:00:00+00:00 2026-09-15T22:00:00+00:00 https://www.olibetta.ch/en-CH/compo/terrarium-substrate-for-small-and-large-animals COMPO ZOO Terrarium Substrate for Small and Large Animals provides ideal conditions for lizards, amphibians and invertebrates. The extra-fine pine bark is particularly loose and lightweight, allowing animals to burrow, dig and lay eggs with ease. At the same time, the substrate helps maintain a stable terrarium environment. Free from chemical additives. Application: Loosen the substrate and apply a layer of at least 5 cm in the terrarium Ensure animals are able to burrow completely Lightly mist with water if required Check regularly for soiling and replace as necessary Suitable for indoor use, in the greenhouse, garden, balcony and pots

Reduces water evaporation
Fitted with a handy grip hole]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/dennerle/nano-tank-cover-glass Protect your carefully designed underwater world with the perfectly fitting Dennerle Nano Tank Cover Glass. It helps keep contaminants out of the aquarium while keeping your fish and other aquatic animals safely inside. Product highlights: Keeps aquarium inhabitants safe: Helps prevent adventurous fish, snails or shrimp from escaping from the aquarium. Reduces water loss: Significantly limits evaporation, helping to maintain a steadier water level and more consistent water parameters. Energy-efficient: Provides light thermal insulation, helping to reduce the amount of energy required by the aquarium heater. Easy to handle: The integrated finger hole makes the cover easy to remove and replace during feeding or routine maintenance. Clear, unobtrusive design: Original Dennerle quality made from high-quality glass for an uninterrupted view of your aquascape. Dimensions: Variant (Volume) Dimensions (L x W) 25 litres 34 x 26 cm 60 litres 58 x 31 cm (short) 60 litres 58 x 33 cm Product details: A high-quality cover glass is a practical addition to any aquascape or nano aquarium. The Dennerle Nano Tank Cover Glass blends discreetly into the clean design of the tank while helping to protect the carefully maintained ecosystem from household dust and other external contaminants. At the same time, it acts as a barrier to help keep dwarf shrimp, snails and fish safely inside the aquarium. Another key benefit is the noticeable reduction in water evaporation. This means less frequent topping up and helps maintain more stable water parameters for healthy plant and animal life. The light insulating effect also means the aquarium heater has less work to do. A practical upgrade designed to complement the Dennerle Nano Tank.

Smart control via SC25
Waterproof & impact-resistant (IP67)]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix120-wrgb-led-complete-set The daytime unix100 WRGB LED Complete Set is a powerful, vibrant lighting solution for your 100 cm aquarium. It combines excellent light output with impressive energy efficiency for a beautifully illuminated aquascape. Product highlights: Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides an ideal light spectrum for photosynthesis. Highly efficient: Delivers 125 lumens per watt for strong illumination with low energy consumption. Full control: The included Smart Control SC25 allows all four colour channels to be adjusted individually. Built for safety: The robust, matt-anodised aluminium housing is impact-resistant and fully sealed to IP67 for reliable water protection. Complete set: Everything you need is included, with the 43.2 W / 5400 lm light, converter and controller supplied as standard. Set includes: 1x unix100 silver WRGB LED light, 93.0 cm (43.2 W / 5400 lm) 1x Mean Well NPF 24V-60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system combines highly efficient full-spectrum and high-spectrum LEDs in powerful WRGB sections to provide bright, balanced lighting for your aquascape. The vivid light enhances the natural colours of fish, while the Hyper Red component at 660 nm supports healthy plant growth. The set is suitable for standard 100 cm aquariums as well as models such as the EHEIM vivalineLED 180 and AQUAEL Opti Set 200. The solid aluminium housing is fully sealed to IP67, offering durable and reliable protection in the aquarium environment.

Smart control via SC25
Waterproof & impact-resistant (IP67)]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix60-wrgb-led-complete-set Compact yet powerful, the daytime unix60 WRGB LED Complete Set provides high-performance lighting for 60 cm aquariums, ideal for aquascaping and healthy plant growth. Product highlights: Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides an ideal light spectrum for photosynthesis. Highly efficient: Delivers 125 lumens per watt for impressive brightness with low power consumption. Full control: The included Smart Control SC25 allows all four colour channels to be adjusted individually. Built for safety: The robust, matt-anodised aluminium housing is impact-resistant and fully sealed to IP67 for reliable water protection. Set includes: 1x unix60 silver WRGB LED light, 53.0 cm (24.0 W / 3000 lm) 1x Mean Well GS 24V-25W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system combines highly efficient full-spectrum and high-spectrum LEDs in sleek WRGB sections. Delivering 24.0 watts and 3000 lumens, this complete set provides powerful, balanced illumination for 60 cm aquariums while enhancing the natural colours of fish and shrimp. Hyper Red light at 660 nm supports photosynthesis and healthy plant growth. The solid aluminium housing is exceptionally durable and fully sealed to IP67 for dependable protection against water. Suitable for standard aquariums as well as models such as the EHEIM vivalineLED 150, the set comes complete with a compatible Mean Well converter and Smart Control SC25 for convenient lighting control.

Flow rate up to 740 l/h
With three outlet options]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-200-internal-filter-for-aquariums-up-to-200-litres The Tetra INX 200 Internal Filter combines reliable filtration with quiet operation for aquariums from 140 to 200 litres. Its multi-stage system uses up to three filter chambers for mechanical, biological and activated-carbon filtration. The continuously adjustable flow rate of up to 740 l/h and variable outlet direction make it easy to tailor water movement to the needs of your aquarium. Three outlet options, including a spray bar and diffuser, allow flexible control of the flow pattern, while the integrated aeration system can be used to increase surface movement and oxygen exchange. The outlet can also assist with partial water changes. Removable filter foams make routine maintenance straightforward, and the 1.4 m power cable provides flexibility when positioning the filter. Key features: Internal filter for aquariums from 140 to 200 litres Multi-stage filtration in up to three chambers, combining mechanical, biological and activated-carbon filtration Adjustable flow rate up to 740 l/h with variable outlet direction Three outlet options, including a spray bar and diffuser, for flexible water circulation Removable filter foams for easy cleaning and a practical water-change function Technical details: Aquarium size: 140–200 litres Max. flow rate: 740 l/h Power: 10.5 W Dimensions (W x D x H): 6.5 x 12.3 x 25.4 cm

WRGB & Hyper Red light (660 nm)
Highly efficient 125 lm/W]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix70-wrgb-led-ju-li200-tr190-set Upgrade the lighting in your JUWEL Lido 200 or Trigon 190 with the daytime unix70 WRGB LED Set. It combines strong plant-supporting performance, vivid colour rendering and smart control in one complete package. Product highlights: Made to fit: Includes a dedicated adapter for the JUWEL Lido 200 and Trigon 190. Supports healthy plant growth: WRGB lighting with Hyper Red (660 nm) provides a well-balanced spectrum for photosynthesis. Highly efficient: Delivers 125 lumens per watt for powerful illumination with low energy consumption. Smart lighting control: The included Smart Control SC25 lets you adjust all four colour channels individually. Durable & protected: The solid, matt-anodised aluminium housing is impact-resistant and fully sealed to IP67 for dependable use around the aquarium. Set includes: 1x unix70 silver WRGB LED light, 63.0 cm (28.8 W / 3600 lm) 1x adapter profile for JUWEL 70 1x Mean Well 60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system is designed to provide bright, efficient aquarium lighting with excellent colour rendering. Its WRGB sections combine highly efficient full-spectrum and high-spectrum LEDs, while the Hyper Red component at 660 nm supports healthy plant growth. Delivering 28.8 watts and 3600 lumens, the light provides strong illumination throughout the aquarium. The complete set includes the robust anodised aluminium light, a Mean Well converter, Smart Control SC25 and a dedicated adapter profile for compatible JUWEL aquariums.

Powerful 8,400 lumens output
WRGB & Hyper Red light (660 nm)]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix150-wrgb-led-ju-ri400-ri450-vi450-set Powerful lighting for larger aquariums: the daytime unix150 WRGB LED Set is designed for the JUWEL Rio 400, Rio 450 and Vision 450, delivering impressive brightness and balanced illumination throughout the tank. Product highlights: Made for larger JUWEL aquariums: Includes a JUWEL 150 adapter profile for straightforward, secure installation. Powerful illumination: 67.2 watts and 8400 lumens provide strong light output, even in deeper areas of the aquarium. Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides a spectrum tailored to aquatic plants. Smart lighting control: The included Smart Control SC25 allows all four colour channels to be adjusted individually. Highly efficient: Delivers 125 lumens per watt for excellent light output with low energy consumption. Set includes: 1x unix150 silver WRGB LED light, 143.0 cm (67.2 W / 8400 lm) 1x adapter profile for JUWEL 150 1x Mean Well 90W LED converter 1x Smart Control SC25 controller Product details: Larger aquariums need lighting that reaches right through the water column. The daytime unix system delivers 67.2 watts and 8400 lumens, providing powerful, even illumination across deep and spacious tanks. Highly efficient full-spectrum and high-spectrum LEDs are arranged in WRGB sections for vivid colour rendering, while the Hyper Red component at 660 nm supports healthy plant growth. Designed specifically for the JUWEL Rio 400, Rio 450 and Vision 450, this complete set includes the robust IP67-protected LED light, a dedicated JUWEL adapter profile, a 90W Mean Well converter and Smart Control SC25.

Quick, tool-free installation
Practical set of 4 for one nano aquarium]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/dennerle/cover-glass-clips A small clip that makes a big difference. The original Dennerle Cover Glass Clips keep the cover glass of your nano aquarium securely in place. Product highlights: Complete set: Includes four matching clips, ideal for using two on each side of the aquarium. Easy to fit: Simply attach the clips without any tools, place the cover glass on top and remove it whenever needed for feeding or maintenance. Secure support: Helps keep the cover glass stable while reducing evaporation and helping to prevent aquarium inhabitants from jumping out. Technical details: Suitable for Current Dennerle Nano Cube & Nano Tank sets Contents 4 pieces Product details: A loose or missing cover glass clip can pose a problem in a carefully designed aquarium layout. The original Dennerle Cover Glass Clips (set of 4) provide reliable support for the cover glass on your Nano Cube or Nano Tank. The practical design allows the clips to be fitted directly onto the edges of the aquarium glass without any tools. The cover glass can then simply be placed on top. The clips are designed to remain securely attached to the aquarium when the glass cover is lifted for everyday feeding or routine plant maintenance. A practical original accessory for keeping your aquascape secure and easy to care for.

WRGB & Hyper Red light (660 nm)
Highly efficient 125 lm/W]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix60-wrgb-led-ju-li120-set Give your JUWEL Lido 120 a lighting upgrade with the daytime unix60 WRGB LED Set. Designed to enhance both your aquascape and the natural colours of its inhabitants, it combines powerful illumination with convenient smart control. Product highlights: Made to fit: Includes a dedicated adapter for seamless installation in the JUWEL Lido 120. Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides a light spectrum tailored to aquatic plants. Vibrant colour rendering: Highly efficient LEDs are arranged in powerful WRGB sections to bring out the colours of fish, plants and your aquascape. Smart lighting control: The Smart Control SC25 lets you adjust all four colour channels individually and create customised lighting settings. Durable & protected: The solid aluminium housing features an impact-resistant seal and IP67 water protection for reliable everyday use around the aquarium. Set includes: 1x unix60 silver WRGB LED light, 53.0 cm (24.0 W / 3000 lm) 1x adapter profile for JUWEL 60 1x Mean Well 25W LED converter 1x Smart Control SC25 controller Product details: Upgrade the lighting in your JUWEL Lido 120 with the daytime unix system. Highly efficient full-spectrum and high-spectrum LEDs are combined in WRGB sections to deliver bright, balanced illumination and vivid colour rendering. The Hyper Red component at 660 nm supports healthy plant growth, while the robust aluminium housing is protected by an impact-resistant, waterproof IP67 seal for dependable use in the aquarium environment. Delivering 24.0 watts and 3000 lumens, the set comes complete with a Mean Well converter, dedicated Lido adapter and Smart Control SC25 for individual control of all four colour channels.

Smart control via SC25
Waterproof & impact-resistant (IP67)]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix90-wrgb-led-complete-set Transform your 80 cm aquarium with the daytime unix80 WRGB LED Complete Set. Powerful lighting supports lush plant growth while bringing out the natural colours of your fish. Product highlights: Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides an ideal light spectrum for photosynthesis. Highly efficient: Delivers 125 lumens per watt for powerful illumination with low energy consumption. Powerful performance: 33.6 watts and 4200 lumens provide bright, even lighting across an 80 cm aquarium. Full control: The included Smart Control SC25 allows all four colour channels to be adjusted individually. Built for safety: The robust, matt-anodised aluminium housing is impact-resistant and fully sealed to IP67 for reliable water protection. Set includes: 1x unix80 silver WRGB LED light, 73.0 cm (33.6 W / 4200 lm) 1x Mean Well NPF 24V-60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system combines highly efficient full-spectrum and high-spectrum LEDs in sleek WRGB sections to provide powerful, balanced illumination for your aquarium. The solid, matt-anodised aluminium housing is protected by a clear, impact-resistant seal and rated to IP67, making it well suited to use around water. Delivering 33.6 watts and 4200 lumens, the set is ideal for 80 cm standard aquariums as well as models such as the EHEIM vivalineLED 126 and OASE StyleLine 175. A high-quality Mean Well converter and Smart Control SC25 for individual control of all four colour channels are also included.

Rounded grains for practical use
Subtle, natural look in the aquarium]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/aqua-decoris-quartz-gravel-16-4-mm This rounded quartz gravel gives aquascapes a natural, balanced look while providing an attractive backdrop for fish, plants and décor. With a grain size of 1.6 to 4 mm, the substrate forms a stable base for both stem and rosette plants, helping roots stay securely anchored. The spaces between the grains also allow water to circulate through the substrate and make routine cleaning easier. A versatile choice for freshwater aquariums where appearance and practicality are equally important. At a glance: Rounded grain size of 1.6–4 mm Natural, understated appearance Stable substrate structure for secure root anchorage Suitable for a wide range of freshwater aquariums

WRGB & Hyper Red light (660 nm)
Highly efficient 125 lm/W]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix90-wrgb-led-ju-vi-180-set Give your JUWEL Vision 180 a complete lighting upgrade with the daytime unix90 WRGB LED Set. It combines strong plant-supporting performance, vivid colour rendering and smart control in a system designed to fit neatly into your aquarium. Product highlights: Made for the JUWEL Vision 180: Includes a dedicated adapter for simple, secure installation. Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides a spectrum tailored to aquatic plants. Vibrant colour rendering: Highly efficient LEDs are arranged in powerful WRGB sections to enhance the natural colours of fish, plants and décor. Smart lighting control: The Smart Control SC25 lets you adjust all four colour channels individually and create customised lighting settings. Durable & protected: The solid aluminium housing is impact-resistant and fully sealed to IP67 for reliable use around the aquarium. Set includes: 1x unix90 silver WRGB LED light, 83.0 cm (38.4 W / 4800 lm) 1x adapter profile for JUWEL 90 1x Mean Well 60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system is designed to bring out the best in the JUWEL Vision 180. Highly efficient full-spectrum and high-spectrum LEDs are combined in WRGB sections to provide bright, balanced illumination with excellent colour rendering. The Hyper Red component at 660 nm supports photosynthesis and healthy plant growth, while the 38.4 W light delivers 4800 lumens across the aquarium. The robust aluminium housing offers impact resistance and IP67 water protection for dependable everyday use. The complete set includes the LED light, dedicated JUWEL adapter, Mean Well converter and Smart Control SC25 for individual control of all four colour channels.

WRGB & Hyper Red light (660 nm)
Highly efficient 125 lm/W]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix120-wrgb-led-ju-ri240-ri300-ri350-vi260-set Upgrade your JUWEL Rio 240/300/350 or Vision 260 with the daytime unix120 WRGB LED Set. Designed for larger aquariums, it combines powerful illumination, vivid colour rendering and smart control in one complete package. Product highlights: Made for compatible JUWEL aquariums: The JUWEL 120 adapter profile makes installation quick and straightforward. Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides a spectrum tailored to aquatic plants. Powerful performance: 52.8 watts and 6600 lumens provide strong illumination, even in deeper areas of the aquarium. Smart lighting control: The Smart Control SC25 lets you adjust all four colour channels individually to create customised lighting effects. Durable & protected: The solid, matt-anodised aluminium housing is impact-resistant and fully sealed to IP67 for reliable use around the aquarium. Set includes: 1x unix120 silver WRGB LED light, 113.0 cm (52.8 W / 6600 lm) 1x adapter profile for JUWEL 120 1x Mean Well 60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system is designed to provide powerful, balanced lighting for larger JUWEL aquariums. Full-spectrum and high-spectrum LEDs are combined in WRGB sections to enhance colour rendering, while the Hyper Red component at 660 nm supports healthy plant growth. The included Smart Control SC25 gives you individual control over all four colour channels, allowing you to create tailored lighting effects such as sunrise or moonlight settings. The robust, matt-anodised aluminium housing is fully sealed to IP67 for dependable protection in the aquarium environment. The complete set includes the LED light, JUWEL adapter, Mean Well converter and controller.

Smart control via SC25
Waterproof & impact-resistant (IP67)]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix80-wrgb-led-complete-set Transform your 80 cm aquarium with the daytime unix80 WRGB LED Complete Set. Powerful lighting supports lush plant growth while bringing out the natural colours of your fish. Product highlights: Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides an ideal light spectrum for photosynthesis. Highly efficient: Delivers 125 lumens per watt for powerful illumination with low energy consumption. Powerful performance: 33.6 watts and 4200 lumens provide bright, even lighting across an 80 cm aquarium. Full control: The included Smart Control SC25 allows all four colour channels to be adjusted individually. Built for safety: The robust, matt-anodised aluminium housing is impact-resistant and fully sealed to IP67 for reliable water protection. Set includes: 1x unix80 silver WRGB LED light, 73.0 cm (33.6 W / 4200 lm) 1x Mean Well NPF 24V-60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system combines highly efficient full-spectrum and high-spectrum LEDs in sleek WRGB sections to provide powerful, balanced illumination for your aquarium. The solid, matt-anodised aluminium housing is protected by a clear, impact-resistant seal and rated to IP67, making it well suited to use around water. Delivering 33.6 watts and 4200 lumens, the set is ideal for 80 cm standard aquariums as well as models such as the EHEIM vivalineLED 126 and OASE StyleLine 175. A high-quality Mean Well converter and Smart Control SC25 for individual control of all four colour channels are also included.

Smart control via SC25
Waterproof & impact-resistant (IP67)]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix100-wrgb-led-complete-set Light up your 90 cm aquarium with bright, even illumination with the daytime unix90 WRGB LED Complete Set. It combines powerful performance, vivid colour rendering and smart lighting control in one complete package. Product highlights: Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides an ideal light spectrum for photosynthesis. Powerful performance: 38.4 watts and 4800 lumens provide bright, far-reaching illumination throughout the aquarium. Highly efficient: Delivers 125 lumens per watt for strong light output with low energy consumption. Full control: The included Smart Control SC25 allows all four colour channels to be adjusted individually. Built for safety: The robust, matt-anodised aluminium housing is impact-resistant and fully sealed to IP67 for reliable water protection. Set includes: 1x unix90 silver WRGB LED light, 83.0 cm (38.4 W / 4800 lm) 1x Mean Well NPF 24V-60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system provides powerful, balanced lighting designed to showcase your aquarium at its best. Instead of conventional standard LEDs, it uses highly efficient full-spectrum and high-spectrum LEDs arranged in WRGB sections. The result is vivid colour rendering for fish and targeted Hyper Red wavelengths to support healthy plant growth. The solid, matt-anodised aluminium housing protects the technology with an impact-resistant, waterproof IP67 seal, making it well suited to the humid aquarium environment. Delivering 38.4 watts, this complete set is ideal for standard 90 cm aquariums as well as the OASE HighLine 200. A compatible Mean Well converter and Smart Control SC25 are included.

WRGB & Hyper Red light (660 nm)
Highly efficient 125 lm/W]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix80-wrgb-led-ju-ri125-set Upgrade your JUWEL Rio 125 with the daytime unix80 WRGB LED Set. The dedicated adapter makes installation straightforward, while the lighting system delivers strong performance for plants, fish and the overall aquascape. Product highlights: Made for the JUWEL Rio 125: Includes a dedicated adapter for a secure and seamless fit. Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides a plant-friendly spectrum. Vivid colour rendering: Highly efficient LEDs are arranged in powerful WRGB sections to enhance the colours of fish, plants and décor. Smart lighting control: The Smart Control SC25 lets you adjust all four colour channels individually and create customised lighting settings. Durable & protected: The solid aluminium housing is impact-resistant and fully sealed to IP67 for reliable use around the aquarium. Set includes: 1x unix80 silver WRGB LED light, 73.0 cm (33.6 W / 4200 lm) 1x adapter profile for JUWEL 80 1x Mean Well 60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system provides powerful, balanced lighting for the JUWEL Rio 125. Delivering 33.6 watts and 4200 lumens, it combines highly efficient full-spectrum and high-spectrum LEDs in WRGB sections for bright, vivid illumination. The Smart Control SC25 gives you flexible control over all four colour channels, making it easy to tailor the lighting to your aquarium. A robust, matt-anodised aluminium housing provides impact resistance and IP67 water protection. The complete set also includes the dedicated adapter and a reliable Mean Well LED converter.

WRGB & Hyper Red light (660 nm)
Highly efficient 125 lm/W]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/daytime-led/unix100-wrgb-led-ju-ri180-ri290-set Upgrade your JUWEL Rio with the daytime unix100 WRGB LED Set. The dedicated adapter profile ensures a neat, secure fit, while the powerful lighting brings out the best in plants, fish and your overall aquascape. Product highlights: Made for JUWEL Rio aquariums: Includes a dedicated adapter for easy integration into the JUWEL Rio 180 or 290. Supports healthy plant growth: WRGB lighting combined with Hyper Red (660 nm) provides a plant-friendly spectrum. Vivid colour rendering: Highly efficient LEDs are arranged in powerful WRGB sections to enhance the natural colours of fish and plants. Smart lighting control: The Smart Control SC25 lets you adjust all four colour channels individually and create customised lighting settings. Durable & protected: The solid aluminium housing is impact-resistant and fully sealed to IP67 for reliable use around the aquarium. Set includes: 1x unix100 silver WRGB LED light, 93.0 cm (43.2 W / 5400 lm) 1x adapter profile for JUWEL 100 1x Mean Well 60W LED converter 1x Smart Control SC25 controller Product details: The daytime unix system delivers 43.2 watts and 5400 lumens of bright, balanced illumination for JUWEL Rio aquariums. Its highly efficient design achieves 125 lumens per watt, combining strong light output with low energy consumption. WRGB sections provide vivid, natural colour rendering, while the Hyper Red component at 660 nm supports healthy plant growth. The complete set includes the LED light, dedicated JUWEL adapter profile, Mean Well converter and Smart Control SC25 for individual control of all four colour channels.

Adjustable water flow
Easy to install]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-200-250-outlet-set This original Tetra outlet set is designed for the INX 200 and INX 250 internal filters. It provides replacement components for a damaged or worn outlet assembly and integrates directly with the existing filter system. The included nozzle pipe and outlet nozzle allow the direction of the water flow to be adjusted to suit the aquarium. Key features: Original outlet spare parts set for Tetra INX 200 and INX 250 internal filters For replacing damaged or worn outlet components Includes nozzle pipe and outlet nozzle for directing the water flow Quick and straightforward fitting

Helps anchor aquarium plants securely
Water-neutral substrate]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/aqua-decoris-quartz-sand-04-12-mm AQUA DECORIS Quartz Sand creates a fine, natural-looking base for freshwater aquariums and aquascapes. Its rounded grain size of 0.4 to 1.2 mm is particularly well suited to bottom-dwelling and substrate-sifting species, allowing them to forage naturally through the sand. The substrate is water-neutral and does not alter existing water parameters, making it a flexible choice for a wide range of freshwater setups. Aquatic plants can also root securely in the dense sand, helping to create stable, long-lasting layouts. At a glance: Fine grain size of 0.4–1.2 mm for versatile aquascapes Rounded structure suitable for substrate-sifting species Does not affect existing water parameters Provides secure anchorage for plant roots Suitable for freshwater aquariums

Flow rate up to 265 l/h
With three outlet options]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-50-internal-filter-for-aquariums-up-to-50-litres The Tetra INX 50 Internal Filter combines reliable filtration with quiet operation for aquariums from 10 to 50 litres. Its multi-stage system uses up to three filter chambers for mechanical, biological and activated-carbon filtration. The continuously adjustable flow rate of up to 265 l/h and variable outlet direction make it easy to tailor water movement to the needs of your aquarium. Three outlet options, including a spray bar and diffuser, allow flexible control of the flow pattern, while the integrated aeration system can be used to increase surface movement and oxygen exchange. The outlet can also assist with partial water changes. Removable filter foams make routine maintenance straightforward, and the 1.4 m power cable provides flexibility when positioning the filter. Key features: Internal filter for aquariums from 10 to 50 litres Multi-stage filtration in up to three chambers, combining mechanical, biological and activated-carbon filtration Adjustable flow rate up to 265 l/h with variable outlet direction Three outlet options, including a spray bar and diffuser, for flexible water circulation Removable filter foams for easy cleaning and a practical water-change function Technical details: Aquarium size: 10–50 litres Max. flow rate: 265 l/h Power: 4 W Dimensions (W x D x H): 4.6 x 8.3 x 11.4 cm

Fine & loose structure
Optimum moisture regulation]]>

2026-09-15T22:00:00+00:00 2026-09-15T22:00:00+00:00 https://www.olibetta.ch/en-CH/compo/tortoise-and-terrarium-substrate COMPO ZOO Tortoise and Terrarium Substrate creates a pleasant microclimate for terrarium animals and supports their natural behaviour. The fine, loose structure is ideal for burrowing and laying eggs. It also ensures optimal humidity and stable climatic conditions even during hibernation. Directions for use: Cover the floor of the terrarium or enclosure with an even layer of the substrate. Suitable for borrowing, laying eggs, and hibernating. Control humidity as needed Natural product, no chemical additives

Quick & easy to replace
Helps restore pump performance]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-100-impeller If your filter's water flow starts to drop, the original Tetra INX 100 Impeller provides a straightforward replacement for the worn component. As a key part of the pump mechanism, the precisely made rotor is designed specifically for the INX 100 internal filter and helps restore reliable water circulation. The impeller can be replaced directly inside the filter housing with minimal effort, helping return the pump to its normal operating performance. Key features: Original replacement impeller (rotor) for the Tetra INX 100 internal filter Helps restore the filter pump's normal flow and pumping performance Replaces a worn or damaged rotor Quick and straightforward replacement inside the filter housing

Quick & easy to replace
Adjustable flow direction]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-50-outlet-set Replace damaged or worn outlet components on your Tetra INX 50 internal filter with this original outlet set. The components are designed for a precise fit and can be installed without special tools. The set includes a nozzle pipe and fan nozzle, allowing you to adjust the direction of the water flow to suit your aquarium. Key features: Original outlet spare parts set for the Tetra INX 50 internal filter Replaces damaged or worn outlet components Includes nozzle pipe and fan nozzle for adjustable flow direction Quick and straightforward tool-free fitting

Quick & easy to replace
Helps restore pump performance]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-150-impeller If your filter's water flow starts to drop, the original Tetra INX 150 Impeller provides a straightforward replacement for the worn component. As a key part of the pump mechanism, the precisely made rotor is designed specifically for the INX 150 internal filter and helps restore reliable water circulation. The impeller can be replaced directly inside the filter housing with minimal effort, helping return the pump to its normal operating performance. Key features: Original replacement impeller (rotor) for the Tetra INX 150 internal filter Helps restore the filter pump's normal flow and pumping performance Replaces a worn or damaged rotor Quick and straightforward replacement inside the filter housing

Quick & easy to replace
Adjustable water flow]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-100-150-outlet-set Replace damaged or missing outlet components on your Tetra INX 100 or INX 150 internal filter with this original outlet set. The parts are designed to fit the filter directly and help restore normal water circulation. The set includes a nozzle pipe and wide-flow nozzle, allowing you to direct the water flow to suit your aquarium setup. Key features: Original outlet spare parts set for Tetra INX 100 and INX 150 internal filters Replaces damaged or missing outlet components Includes nozzle pipe and wide-flow nozzle for directed water circulation Quick and straightforward tool-free fitting

Helps bind impurities & odours
pH-neutral filtration]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-200-250-carbon-filter-3-pack These activated-carbon filter foams are designed for Tetra INX 200 and INX 250 internal filters. The foam is coated with activated carbon across its surface to provide even contact with the aquarium water. The filter media can help remove dissolved organic substances, discolouration, odours and residues of aquarium medication from freshwater aquariums. Tetra recommends replacing the media once a month. Key features: 3-pack of activated-carbon filter foams for Tetra INX 200 and INX 250 Activated-carbon coating across the foam surface Helps remove medication residues, discolouration and unpleasant odours pH-neutral filter media for freshwater aquariums

Helps maintain clear water
Mechanical filtration]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-200-250-foam-pre-filter-foam-set-2-pack Designed for Tetra INX 200 and INX 250 internal filters, this three-piece foam set provides mechanical filtration and a suitable surface for beneficial filter bacteria. The combination of different pore sizes helps trap suspended debris as aquarium water passes through the filter. The set contains two standard filter foams and one pre-filter foam, making it a practical replacement set for routine filter maintenance. Key features: Replacement foam set for Tetra INX 200 and INX 250 internal filters Includes 2 standard filter foams and 1 pre-filter foam Coarse and fine pore structures for effective mechanical filtration

Helps bind impurities & odours
pH-neutral filtration]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-100-150-carbon-filter-3-pack These activated-carbon filter foams are designed for Tetra INX 100 and INX 150 internal filters. The foam is coated with activated carbon across its surface to provide even contact with the aquarium water. The filter media can help remove dissolved organic substances, discolouration, odours and residues of aquarium medication from freshwater aquariums. Tetra recommends replacing the media once a month. Key features: 3-pack of activated-carbon filter foams for Tetra INX 100 and INX 150 Activated-carbon coating across the foam surface Helps remove medication residues, discolouration and unpleasant odours pH-neutral filter media for freshwater aquariums

Flow rate up to 425 l/h
With three outlet options]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-100-internal-filter-for-aquariums-up-to-100-litres The Tetra INX 100 Internal Filter combines reliable filtration with quiet operation for aquariums from 40 to 100 litres. Its multi-stage system uses up to three filter chambers for mechanical, biological and activated-carbon filtration. The continuously adjustable flow rate of up to 425 l/h and variable outlet direction make it easy to tailor water movement to the needs of your aquarium. Three outlet options, including a spray bar and diffuser, allow flexible control of the flow pattern, while the integrated aeration system can be used to increase surface movement and oxygen exchange. The outlet can also assist with partial water changes. Removable filter foams make routine maintenance straightforward, and the 1.4 m power cable provides flexibility when positioning the filter. Key features: Internal filter for aquariums from 40 to 100 litres Multi-stage filtration in up to three chambers, combining mechanical, biological and activated-carbon filtration Adjustable flow rate up to 425 l/h with variable outlet direction Three outlet options, including a spray bar and diffuser, for flexible water circulation Removable filter foams for easy cleaning and a practical water-change function Technical details: Aquarium size: 40–100 litres Max. flow rate: 425 l/h Power: 5 W Dimensions (W x D x H): 5.5 x 9.9 x 20.4 cm

Flow rate up to 890 l/h
With three outlet options]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-250-internal-filter-for-aquariums-up-to-250-litres The Tetra INX 250 Internal Filter combines reliable filtration with quiet operation for aquariums from 190 to 250 litres. Its multi-stage system uses up to three filter chambers for mechanical, biological and activated-carbon filtration. The continuously adjustable flow rate of up to 890 l/h and variable outlet direction make it easy to tailor water movement to the needs of your aquarium. Three outlet options, including a spray bar and diffuser, allow flexible control of the flow pattern, while the integrated aeration system can be used to increase surface movement and oxygen exchange. The outlet can also assist with partial water changes. Removable filter foams make routine maintenance straightforward, and the 1.4 m power cable provides flexibility when positioning the filter. Key features: Internal filter for aquariums from 190 to 250 litres Multi-stage filtration in up to three chambers, combining mechanical, biological and activated-carbon filtration Adjustable flow rate up to 890 l/h with variable outlet direction Three outlet options, including a spray bar and diffuser, for flexible water circulation Removable filter foams for easy cleaning and a practical water-change function Technical details: Aquarium size: 190–250 litres Max. flow rate: 890 l/h Power: 13 W Dimensions (W x D x H): 6.5 x 12.3 x 31.6 cm

Secure attachment to the aquarium glass
Includes aeration function]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-50-100-150-spare-parts-set This original Tetra spare parts set is designed for the INX 50, INX 100 and INX 150 internal filters. It makes it easy to replace worn suction cups and restore a secure fit against the aquarium glass. The set also includes the matching aeration valve and hose, allowing the air supply to be adjusted as required. Key features: Original spare parts set for Tetra INX 50, INX 100 and INX 150 internal filters Strong suction cups for secure attachment to the aquarium glass Includes hose and valve for adjusting the air supply Quick, tool-free replacement

Quick & easy to replace
Helps restore pump performance]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-200-40-mt-impeller If your filter's water flow starts to drop, the original Tetra INX 200 Impeller provides a straightforward replacement for the worn component. As a key part of the pump mechanism, the precisely made rotor is designed specifically for the INX 200 internal filter and helps restore reliable water circulation. The impeller can be replaced directly inside the filter housing with minimal effort, helping return the pump to its normal operating performance. Key features: Original replacement impeller (rotor) for the Tetra INX 200 internal filter Helps restore the filter pump's normal flow and pumping performance Replaces a worn or damaged rotor Quick and straightforward replacement inside the filter housing

Flow rate up to 470 l/h
With three outlet options]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-150-internal-filter-for-aquariums-up-to-150-litres The Tetra INX 150 Internal Filter combines reliable filtration with quiet operation for aquariums from 90 to 150 litres. Its multi-stage system uses up to three filter chambers for mechanical, biological and activated-carbon filtration. The continuously adjustable flow rate of up to 470 l/h and variable outlet direction make it easy to tailor water movement to the needs of your aquarium. Three outlet options, including a spray bar and diffuser, allow flexible control of the flow pattern, while the integrated aeration system can be used to increase surface movement and oxygen exchange. The outlet can also assist with partial water changes. Removable filter foams make routine maintenance straightforward, and the 1.4 m power cable provides flexibility when positioning the filter. Key features: Internal filter for aquariums from 90 to 150 litres Multi-stage filtration in up to three chambers, combining mechanical, biological and activated-carbon filtration Adjustable flow rate up to 470 l/h with variable outlet direction Three outlet options, including a spray bar and diffuser, for flexible water circulation Removable filter foams for easy cleaning and a practical water-change function Technical details: Aquarium size: 90–150 litres Max. flow rate: 470 l/h Power: 5.5 W Dimensions (W x D x H): 5.5 x 9.9 x 25.5 cm

Includes strong suction cups
Quick and easy to replace]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-200-250-spare-parts-set Keep your aquarium filter securely in place and functioning as designed with this original Tetra spare parts set for the INX 200 and INX 250 internal filters. It includes replacement components for worn, damaged or missing parts. The set includes strong suction cups for secure attachment to the aquarium glass, together with the matching hose and valve components for adjusting the air supply. Key features: Original spare parts set for Tetra INX 200 and INX 250 internal filters Includes strong suction cups for secure attachment to the aquarium glass Includes hose and valve components for adjusting the aeration Quick, tool-free replacement of worn components

Helps bring out the colours in your aquarium
Water-neutral for stable water parameters]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/aqua-decoris-gravel-2-3-mm AQUA DECORIS Gravel adds colour and texture to the aquarium and helps create an attractive underwater landscape. With a fine grain size of 2 to 3 mm and rounded particles, it provides a comfortable substrate for aquarium inhabitants while giving delicate plant roots a secure hold. The gravel is water-neutral, so it does not alter key water parameters. This makes it suitable for a wide range of freshwater aquariums and planted setups. It is also easy to work with when creating or refreshing an aquascape. At a glance: Grain size: 2–3 mm Colourful appearance highlights plants and fish Water-neutral in freshwater aquariums Rounded gravel for easy maintenance

For lush and vibrant plants
Easy to use with a measuring cap]]>

2026-09-09T22:00:00+00:00 2026-09-09T22:00:00+00:00 https://www.olibetta.ch/en-CH/dennerle/plant-system-set-1 Transform aquariums from 100 litres into a thriving underwater paradise. The intelligent 3-component system {shoparticle.B21JMOLPRD06CA80XTG249W75.title} gives aquatic plants targeted support for strong growth and vibrant colour. Product highlights: Complete all-round care for aquariums from 100 litres Highly concentrated and very economical to use Supports brilliant colours and strong aquatic plants Product details: For anyone dreaming of a lush, beautifully planted aquarium, {shoparticle.B21JMOLPRD06CA80XTG249W75.title} is an excellent choice. This clever fertiliser system is based on decades of research and divides nutrient supply into three essential steps: reliable basic care, targeted iron supplementation and a powerful vital nutrient booster. This helps ensure that an underwater oasis is perfectly supplied at all times. Aquatic plants take up nutrients at different speeds, so being able to add measured amounts of each component separately helps prevent deficiencies and avoid over-fertilising. The practical measuring cap makes application quick and easy. Create a biologically balanced ecosystem where fish feel at home, and aquatic plants display their most beautiful colours. Perfect for large community tanks and demanding aquascapes.

Fördert den Pflanzenwachstum
Leichte & präzise Tropfdosierung]]>

2026-09-09T22:00:00+00:00 2026-09-09T22:00:00+00:00 https://www.olibetta.ch/en-CH/dennerle/plant-system-set-nano Bring your nano aquarium to life! The professional {shoparticle.B21JMOLPRD06CA80XSXTU3F10.title} makes it easy to create a vibrant green underwater world. Product highlights: Complete plant care system for aquariums up to 100 litres Supports lush growth and intense plant colouration Helps prevent nutrient deficiencies with needs-based drop dosing Product in detail: The {shoparticle.B21JMOLPRD06CA80XSXTU3F10.title} is designed to support a thriving aquarium ecosystem. Its carefully balanced combination of a complete basic fertiliser, a highly effective iron fertiliser and an essential vital nutrient mix supplies aquatic plants with the nutrients they need for healthy growth. Since aquarium plants use different nutrients at different rates, the separate dosing system allows for tailored, natural-style plant care. The result is stronger roots, more vibrant leaves and a biologically stable environment for fish and shrimp. The practical dropper bottles make the set easy to use, whether for beginners, community aquariums or dedicated aquascapers looking to get the best from their nano tank. Enjoy your flourishing underwater landscape!

Does not alter water parameters
Provides good anchorage for fine roots]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/aqua-decoris-quartz-sand-01-03-mm Create a natural-looking aquarium floor for bottom-dwelling species such as loaches and Corydoras. With its very fine grain size of 0.1 to 0.3 mm, this natural quartz sand is well suited to fish and invertebrates that like to sift or burrow in the substrate. The even texture also gives aquatic plants a secure base for their roots, while the subtle colour keeps the overall look calm and natural. The quartz sand is inert and water-neutral, so it does not alter pH or water hardness. The practical 10 kg pack is ideal for creating fine sand zones in freshwater aquascapes. At a glance: Very fine grain size of 0.1–0.3 mm Ideal for burrowing and bottom-dwelling freshwater species Water-neutral quartz substrate Provides secure anchorage for plant roots Does not alter water parameters

Helps stabilise pH and water hardness
Suitable for freshwater and marine aquariums]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/natural-mixed-aquarium-gravel-5-10-mm Create a solid base for freshwater or marine aquariums with this natural mixed gravel. The larger grain size of 5 to 10 mm provides good anchorage for aquarium plants and works well in structured aquascapes. The mineral composition can influence aquarium water chemistry by increasing and helping maintain water hardness and pH. This should be taken into account when choosing the substrate for a particular setup. A practical option for aquascapers looking for a coarser, natural-looking substrate with a strong visual presence. At a glance: Grain size of 5–10 mm for a stable base Suitable for freshwater and marine aquariums Can increase and help maintain pH and water hardness Helps anchor plant roots securely Coarse natural substrate for aquascaping

Helps maintain clear water
Mechanical filtration]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-100-150-foam-pre-filter-foam-set-2-pack Designed for Tetra INX 100 and INX 150 internal filters, this three-piece foam set provides mechanical filtration and a suitable surface for beneficial filter bacteria. The combination of different pore sizes helps trap suspended debris as aquarium water passes through the filter. The set contains two standard filter foams and one pre-filter foam, making it a practical replacement set for routine filter maintenance. Key features: Replacement foam set for Tetra INX 100 and INX 150 internal filters Includes 2 standard filter foams and 1 pre-filter foam Coarse and fine pore structures for effective mechanical filtration

Encourages strong root growth in aquarium plants
Supports biological filtration]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/aqua-decoris-substrate-3-5-mm AQUAEL GRUNT/FLORA Aquarium Substrate provides a nutrient-rich base for planted freshwater aquariums and is designed with aquatic plants in mind. The substrate gives fine plant roots a secure hold and supplies them with essential minerals and nutrients. Its porous structure also provides a large surface area for beneficial nitrifying bacteria to colonise. These microorganisms contribute to biological filtration and help support a stable aquarium environment, making the substrate a practical choice for densely planted freshwater setups. At a glance: Designed for planted freshwater aquariums Source of minerals and nutrients for plant roots Porous structure provides space for beneficial filter bacteria Suitable as a functional base layer in freshwater aquariums

Helps stabilise key water parameters
Suitable for freshwater and marine aquariums]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/natural-mixed-aquarium-gravel-14-2-mm With its fine grain size of 1.4 to 2 mm, this natural mixed gravel provides a stable base for aquarium plants and helps keep roots securely anchored. The mineral composition can influence water chemistry by increasing and helping maintain pH and water hardness. The substrate can be used in both freshwater and marine aquariums, provided the resulting water parameters are suitable for the livestock being kept. Its fine, natural appearance also makes it a versatile choice for planted layouts and decorative aquascapes. At a glance: Fine grain size of 1.4–2 mm Suitable for freshwater and marine aquariums Can increase and help maintain pH and water hardness Provides secure anchorage for plant roots Natural base for aquascaping

Helps stabilise key water parameters
Suitable for freshwater and marine aquariums]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/natural-mixed-aquarium-gravel-3-5-mm With a balanced grain size of 3 to 5 mm, this natural mixed gravel provides a stable base for aquarium plants and helps keep roots securely anchored. The natural mix of stone colours gives the aquarium an authentic look, while the mineral composition can influence water chemistry by increasing and helping maintain pH and water hardness. The substrate is suitable for both freshwater and marine aquariums, provided the resulting water parameters are appropriate for the livestock being kept. It is a practical choice for planted and decorative layouts alike. At a glance: Balanced grain size of 3–5 mm Suitable for freshwater and marine aquariums Can increase and help maintain pH and water hardness Provides secure anchorage for plant roots Natural base for aquascaping

Quick & easy to replace
Helps restore pump performance]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-250-40-mt-impeller If your filter's water flow starts to drop, the original Tetra INX 250 Impeller provides a straightforward replacement for the worn component. As a key part of the pump mechanism, the precisely made rotor is designed specifically for the INX 250 internal filter and helps restore reliable water circulation. The impeller can be replaced directly inside the filter housing with minimal effort, helping return the pump to its normal operating performance. Key features: Original replacement impeller (rotor) for the Tetra INX 250 internal filter Helps restore the filter pump's normal flow and pumping performance Replaces a worn or damaged rotor Quick and straightforward replacement inside the filter housing

Helps bind impurities & odours
pH-neutral filtration]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-50-carbon-filter-3-pack These activated-carbon filter foams are designed for the Tetra INX 50 internal filter. The foam is coated with activated carbon across its surface to provide even contact with the aquarium water. The filter media can help remove dissolved organic substances, discolouration, odours and residues of aquarium medication from freshwater aquariums. Tetra recommends replacing the media once a month. Key features: 3-pack of activated-carbon filter foams for the Tetra INX 50 Activated-carbon coating across the foam surface Helps remove medication residues, discolouration and unpleasant odours pH-neutral filter media for freshwater aquariums

Quick & easy to replace
Helps restore pump performance]]>

2026-08-24T22:00:00+00:00 2026-08-24T22:00:00+00:00 https://www.olibetta.ch/en-CH/tetra/inx-50-impeller If your filter's water flow starts to drop, the original Tetra INX 50 Impeller provides a straightforward replacement for the worn component. As a key part of the pump mechanism, the precisely made rotor is designed specifically for the INX 50 internal filter and helps restore reliable water circulation. The impeller can be replaced directly inside the filter housing with minimal effort, helping return the pump to its normal operating performance. Key features: Original replacement impeller (rotor) for the Tetra INX 50 internal filter Helps restore the filter pump's normal flow and pumping performance Replaces a worn or damaged rotor Quick and straightforward replacement inside the filter housing

Provides firm anchorage for plant roots
Ideal for modern aquascapes]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/basalt-aquarium-gravel-2-4-mm Create bold contrast in your freshwater aquarium with dark basalt gravel. Its deep colour makes green plants, colourful fish and decorative elements stand out beautifully. With a grain size of 2 to 4 mm, the substrate provides a stable base for aquatic plants and helps keep roots securely anchored. It is particularly well suited to modern aquascapes where strong contrast and visual depth are part of the design. At a glance: Dark basalt gravel for freshwater aquariums Grain size of 2–4 mm for secure anchorage Creates strong visual contrast in the aquarium Provides a stable base for plant roots Ideal for modern aquascaping layouts

Provides support for plant roots
Light-coloured finish for bright aquascapes]]>

2026-09-16T22:00:00+00:00 2026-09-16T22:00:00+00:00 https://www.olibetta.ch/en-CH/aquael/dolomite-aquarium-gravel-2-4-mm This high-quality dolomite gravel has a light, natural appearance that brightens freshwater aquariums and creates a clean, balanced look. The 2 to 4 mm grain size gives aquarium plants a secure hold, making it suitable for both stem and rosette plants. Unlike inert substrates, dolomite can influence aquarium water chemistry by increasing and helping maintain water hardness and pH. It is therefore best suited to setups where harder, more alkaline water is appropriate. At a glance: High-quality dolomite substrate for freshwater aquariums Light, natural appearance Grain size of 2–4 mm for secure root anchorage Can increase and help maintain pH and water hardness Easy to work with when planting an aquascape